Stone display sample cleaning and descaling method
Stone samples have been placed on the display rack for a long time,which is easy to get old when encountering dust.If the stone display stand is exposed to water or placed in a humid environment for a long time,it is very easy to fall off the paint and rust,these rusts usually stick to the stone samples and affect the aesthetics of the stone samples.so how do you deal with this problem?
Rust removal operation steps:the rust remover and water are stirred evenly at a ratio of 1:0-1,and directly applied to the rust scale of the stone.After the rust is completely removed ((It takes about a few minutes to several hours,depending on the specific conditions of the rust,the original iron rust scale of the stone,such as rust stone,the rust removal time will be longer,about 1 hour)and then cleaned with water.
several tips that you should pay attention to:
1.Wear protective equipment during operation to avoid directly touch with the skin.If inadvertently touch it,rinse with water immediately.
2.Excessive cleaning or cleaning agent stays on the stone for a long time,which will
cause some stones whitish.Before large-area cleaning,you must first do a partial small test(first dilute the cleaning agent with water before testing) to confirm the effect.
Tsianfan (Xiamen) Industry & Trade Co.,Ltd.is a professional display rack manufacturer integrating design,production and sales.We have a team dedicated to providing you with the most cost-effective design and manufacturing solutions for stone display stand,like quartz display stand,stone display tower,etc,more info,please visit our homepage.
Rust removal operation steps:the rust remover and water are stirred evenly at a ratio of 1:0-1,and directly applied to the rust scale of the stone.After the rust is completely removed ((It takes about a few minutes to several hours,depending on the specific conditions of the rust,the original iron rust scale of the stone,such as rust stone,the rust removal time will be longer,about 1 hour)and then cleaned with water.
several tips that you should pay attention to:
1.Wear protective equipment during operation to avoid directly touch with the skin.If inadvertently touch it,rinse with water immediately.
2.Excessive cleaning or cleaning agent stays on the stone for a long time,which will
cause some stones whitish.Before large-area cleaning,you must first do a partial small test(first dilute the cleaning agent with water before testing) to confirm the effect.
Tsianfan (Xiamen) Industry & Trade Co.,Ltd.is a professional display rack manufacturer integrating design,production and sales.We have a team dedicated to providing you with the most cost-effective design and manufacturing solutions for stone display stand,like quartz display stand,stone display tower,etc,more info,please visit our homepage.
评论
发表评论